Fri Feb 11, 2005 2:38 am
Fri Feb 11, 2005 2:47 am
Fri Feb 11, 2005 9:12 am
Fri Feb 11, 2005 6:15 pm
Fri Feb 11, 2005 8:57 pm
MSDN KB Q297185 wrote:[...] restart the computer to the Recovery Console, and then use the chkdsk /r command to repair the volume. After you repair the volume, check your hardware to isolate the cause of the file system damage.
To do this, use the following steps:
1. Start your computer with the Windows startup disks, or with the Windows CD-ROM if your computer can start from the CD-ROM drive.
2. When the Welcome to Setup screen appears, press R to select the repair option.
3. If you have a dual-boot or multiple-boot computer, select the Windows installation that you want to access from the Recovery Console.
4. Type the administrator password when you are prompted to do so.
NOTE: If no administrator password exists, press ENTER.
5. At the command prompt, on the drive where Windows is installed, type chkdsk /r, and then press ENTER.
6. At the command prompt, type exit, and then press ENTER to restart your computer.
Sat Feb 12, 2005 1:44 am
Fri Feb 18, 2005 5:25 pm
Fri Feb 18, 2005 7:09 pm
Thu Mar 03, 2005 9:51 pm