Homework Help Thread--SPLIT

Anything and everything goes in here... within reason.

Moderator: Moderators

Locked
Message
Author
Ammer
Honorary Member
Honorary Member
Posts: 8027
Joined: Mon May 31, 2004 5:00 am
Location: Thornhill, Ontario

#91 Post by Ammer »

Ixist wrote:
Ammer wrote:I'm writing a paper on the United Nations and if its relevant in insuring peace and security. The problem I'm having is actually coming up with an opening sentence or sentences for the essay. I have the information for points but I can't for the life of me start this essay with a general look on the topic.

Any thoughts?


Maybe talk a bit about how it was created after WWII to ensure peace, but without the constraintns of the League of Nations. Then say something like "However, does the United Nations live up to it's name? Is it actually fulfill it's original duty and ensure global peace?" Then you could go into your whole schpiel about whether it does or doesn't. It also makes it easy to answer the question at the end by saying "Yes, it does live up to it's purpose" or "no, it does not live up to it's purpose".


I did write a few paragaphs on how it was created and I talked about the League of Nations as well.

But I think I need something more general, becuase the creation of the UN can actually be used in my essay as more than an introduction.

Edit:

Actually, I think you're onto something. Thanks Ixist!
Image
Set by Medli
FrankieG
PPT Trainee
PPT Trainee
Posts: 505
Joined: Mon May 31, 2004 4:18 am
Location: Denver, Pennsylvania
Contact:

#92 Post by FrankieG »

Anyone here good at Macro Economics? I have some quick questions. If government spending falls, what happens to prices, output, and employment? Also, am I right in thinking that if oil prices increase, only the SRAS (Short-Run Aggregate Supply) curve would be affected, and it would shift to the left? And finally, if oil prices increased and it shifted that curve to the left..am I right in thinking prices would increase while output and employment would decrease? (Whew, that was a lot)
Image
Zilary
Honorary Member
Honorary Member
Posts: 698
Joined: Tue Jul 11, 2006 6:06 am
Location: Roger that, captain.

#93 Post by Zilary »

FrankieG wrote:Anyone here good at Macro Economics? I have some quick questions. If government spending falls, what happens to prices, output, and employment? Also, am I right in thinking that if oil prices increase, only the SRAS (Short-Run Aggregate Supply) curve would be affected, and it would shift to the left? And finally, if oil prices increased and it shifted that curve to the left..am I right in thinking prices would increase while output and employment would decrease? (Whew, that was a lot)


Eurk. I took that last semester. Let's see what I remember...

If goverment spending falls, prices increase, output decrease, and employment decrease because goverment spends on areas (public works, etc) that puts money into the economy.

If oil prices increase, the SRAS would shift...to the LEFT.
Because (here's my sad paint diagram)
Image

Thus, output will decrease and employment will decrease

(I'm like 90% sure on that...anyone feel free to correct me if I'm wrong)
Image
M. Bison
PPT Toddler
PPT Toddler
Posts: 137
Joined: Tue Jun 22, 2004 8:35 pm
Location: Georgia Institute of Technology

#94 Post by M. Bison »

The thing with Macroeconomics is different economists see things differently - so very often - your predictions depend on which economists' model you used.

Assuming a classical AS-AD model, Zilary is mostly correct.

If government spending falls - all else equal - output will fall. When the government cuts spending, the demand for some goods and services (take, for example, defense contractors) falls, causing the aggregate (overall) demand to decrease. This can be seen as a leftward shift of the AD curve. If you draw the AS-AD model and shift the AD curve inwards, you will clearly see that: output falls, prices fall, and unemployment increases (or equivalently employment decreases - some defense contractors are out of a job).

You are correct on your analysis of an oil shock. Prices rise yet unemployment rises.

This is known as stagflation and is a nightmare for government economists. As if you have seen - fiscal policy - the tweaking of government spending (and tax rates) to influence the economy has its drawbacks. Increasing spending results in lower unemployment but higher prices - inflation. Decreasing spending results in lower inflation - but higher unemployment. When both inflation and unemployment rise - fiscal policy can only solve one problem - and at the expense of exacerbating the other!
Image
Twizzler0171
Honorary Member
Honorary Member
Posts: 5414
Joined: Sat Jun 19, 2004 2:59 am
Location: The Forests of Thought
Contact:

#95 Post by Twizzler0171 »

Could someone help me with balancing this? I can't quite figure it out -- I may be writing down the formula wrong though. =/ Thanks.

Sulfuric acid (hydrogen sulfate) reacts with sodium hydroxide to produce water and sodium sulfate in an acid-base reaction.

I think this is what it is, I just can't balance it:
H2SO4 + NaOH --> H2O + NaSO4
ImageImageImage
Set by WIS (I think XD), awesome fader by Bangel!
M. Bison
PPT Toddler
PPT Toddler
Posts: 137
Joined: Tue Jun 22, 2004 8:35 pm
Location: Georgia Institute of Technology

#96 Post by M. Bison »

Sulfate, SO4, has a 2- ion charge and sodium is 1+, so sodium sulfate is Na2SO4.

After that, the balancing is trivial:

H2SO4 + 2NaOH ---> 2H2O + Na2SO4
Image
Twizzler0171
Honorary Member
Honorary Member
Posts: 5414
Joined: Sat Jun 19, 2004 2:59 am
Location: The Forests of Thought
Contact:

#97 Post by Twizzler0171 »

Ah! That's correct. I remembered it on the Hydrogen atom (mainly because it was a diatomic element, I think) but had forgotten to insert it onto the Nitrogen atom... that's where I was going wrong.

Thanks a lot! ^^
ImageImageImage
Set by WIS (I think XD), awesome fader by Bangel!
Zilary
Honorary Member
Honorary Member
Posts: 698
Joined: Tue Jul 11, 2006 6:06 am
Location: Roger that, captain.

#98 Post by Zilary »

If f is a continuous function and F'(x) = f(x) for all real numbers x, then...

...the integral from 1 to 3, f(2x)dx=??

a) 2F(3) - 2F(1)
b) 0.5F(3) - 0.5F(1)
c) 2F(6) - 2F(2)
d) F(6) - F(2)
e) 0.5F(6) - 0.5F(2)


(Man, there's an AP test coming up in 3 weeks and I can't even get the EASY stuff...*cries*)
Image
pipsqueeek
PPT God
PPT God
Posts: 1842
Joined: Mon Oct 03, 2005 4:46 pm
Location: sleep deprivation

#99 Post by pipsqueeek »

I'd do this sort of guess and check. antiderivative of f(x) is F(x), so try F(2x). Taking the derivative of that gives you 2*f(2x), so divide by two and you've got F(2x)/2, from 1 to 3. So, (F(6)-F(2))/2
or e) .5F(6) - .5F(2)
Image
<3 Laq
Zilary
Honorary Member
Honorary Member
Posts: 698
Joined: Tue Jul 11, 2006 6:06 am
Location: Roger that, captain.

#100 Post by Zilary »

Thanks!! I really appreciated your help :)
Image
Harmonize
PPT Warrior
PPT Warrior
Posts: 788
Joined: Mon May 31, 2004 12:10 pm

#101 Post by Harmonize »

I'm really confused. Ive done the correct method for working it out and stuff, but for some reason I'm not getting the same answer in the answer book, so I must be getting it wrong.

Q) A yacht sails x km due east from a marker O then y km due north to buoy B. Calculate the magnitude and direction of the displacement vector OB --> when:

x = 5, y = 8

Ok, so I've worked out the displacement, easy enough, but I cant get the direction of the displacement right :(

Thanks loads in advance.

EDIT: -_- Never mind, I worked it out.
Anoohilator
Beyond Godly
Beyond Godly
Posts: 4460
Joined: Fri Jan 21, 2005 1:23 pm
Location: Essex, UK "'"Set by WIS"'"

#102 Post by Anoohilator »

Have you tried 90° - the angle you got? I used to have a problem with assuming it had to be given as a bearing, and being VERY confused with the angle being given as anticlockwise from the horizontal axis :P

EDIT: Never mind you worked it out :P Can I know what the problem was? Got an AS exam this Monday, and would always be useful to know..
ImageImage

Boom-shaka-laka! Rawr come and join us in the Randomness
Sig Halloween'd by Tom!
Harmonize
PPT Warrior
PPT Warrior
Posts: 788
Joined: Mon May 31, 2004 12:10 pm

#103 Post by Harmonize »

Anoohilator wrote:Have you tried 90° - the angle you got? I used to have a problem with assuming it had to be given as a bearing, and being VERY confused with the angle being given as anticlockwise from the horizontal axis :P

EDIT: Never mind you worked it out :P Can I know what the problem was? Got an AS exam this Monday, and would always be useful to know..


Well basically I kept forgetting I have to do sin^-1 :(

To work it out had to go something like this:

9.4/sin90 = 8/sin?

9.4 = 8sin90/sin?

8sin90/9.4 = sin?

sin^-1(8sin90/9.4) = ?
Anoohilator
Beyond Godly
Beyond Godly
Posts: 4460
Joined: Fri Jan 21, 2005 1:23 pm
Location: Essex, UK "'"Set by WIS"'"

#104 Post by Anoohilator »

Why not just use normal right-angled triangle trigonometry? SOH CAH TOA and all that jazz..
ImageImage

Boom-shaka-laka! Rawr come and join us in the Randomness
Sig Halloween'd by Tom!
Harmonize
PPT Warrior
PPT Warrior
Posts: 788
Joined: Mon May 31, 2004 12:10 pm

#105 Post by Harmonize »

Anoohilator wrote:Why not just use normal right-angled triangle trigonometry? SOH CAH TOA and all that jazz..


...Cause its half 11 and I'm too tired to use my brain lol
Locked